MBL (USA) | MEGA TORQUE Series

High power transmission

Compact design

High durability

Low noise

Superior durability

Long operation life

By using a cutting-edge carbon core wire, our belt minimizes elongation and seamlessly transmits heavy loads. Our specially formulated rubber compound enables an extraordinary transmission capacity, surpassing the MEGA TORQUE G Timing Belt by approximately 1.9 times. This allows us to significantly narrow the belt width without compromising performance. Additionally, our wear-resistant and low-friction tooth cloth enhances durability even under demanding loads.

High transmission capacity

Approximately 1.9 times higher load transmission than our MEGA TORQUE G Timing Belt is possible.

Jumping torque characteristics

Achieves approximately 1.6 times the jumping torque characteristics of our MEGA TORQUE G timing belt.

Low noise

Approximately 12% less noise than our Mega Torque G Timing Belt .

With the integration of a carbon core wire, this belt effectively prevents elongation and enables the transmission of heavy loads. Moreover, our utilization of a special compound rubber has resulted in a transmission capacity that is approximately 1.5 times greater than that of the MEGA TORQUE G Timing Belt. As a result, the belt width can be narrowed. To enhance durability under high loads, we have employed wear-resistant, low-friction treated tooth cloth.

High Transmission Capacity

Approximately 1.5 times higher load transmission than our Mega Torque G Timing Belt.

Jumping torque characteristics

Achieved about 1.3 times the jumping torque characteristics compared to our Mega Torque G Timing Belt .

Low noise

Approximately 12% less noise than our Mega Torque G Timing Belt.

The carbon core wire integration achieves remarkable torque, eliminating tooth jumping during sudden acceleration or deceleration. Its outstanding damping properties reduce vibration convergence time, enhancing positioning speed. This groundbreaking innovation ensures precise positioning with minimal belt elongation.

Jumping torque characteristics

By adopting a carbon core wire, it is possible to prevent tooth jumping during sudden acceleration and deceleration.
* The index is our product Mega Torque G ratio.

Positioning completion time

By adopting a carbon core wire, the vibration convergence time can be shortened.
* The index is our product MEGA TORQUE G ratio.

Repeated positioning error

By adopting carbon core wire, the elongation of the belt can be minimized.
* The index is our product MEGA TORQUE G ratio.

MTS5M

MTS3M

The MEGA TORQUE G stands out for its superior transmission capacity when compared to the SUPER TORQUE G Timing Belts. This allows for the use of narrower belts and pulleys, resulting in a more streamlined and compact design. Additionally, the Super Torque timing pulley can be used as is for MTS8M, and MTS14M. Only the MTS5M requires a specially designed pulley.

High transmission capacity

Enables twice as high load transmission compared to our standard product.

Jumping torque characteristics

Achieved approximately 1.7 times the jumping torque characteristics compared to our standard product.

MTS5M

MTS8M

MTS14M

MEGA TORQUE EP boasts a cutting-edge combination of high-stiffness EPDM rubber and specially treated nylon fabric, resulting in unparalleled resistance to abrasion. These exceptional qualities make MEGA TORQUE EP the ideal choice for various applications, even in the harshest conditions.

High transmission capacity

With the incorporation of the innovative GP tooth profile, along with high-stiffness EPDM rubber and specially treated nylon fabric, the MEGA TORQUE EP boasts an impressive power rating that is more than double that of the H series and almost on par with the power of competing belts.

Jumping torque characteristics

With the incorporation of the innovative GP tooth profile and the utilization of highly rigid EPDM rubber, MEGA TORQUE EP exhibits exceptional jumping torque capabilities, effectively preventing tooth jumping during rapid acceleration and deceleration.

Durability performance

With its high stiffness EPDM rubber and specially treated nylon fabric, MEGA TORQUE EP surpasses both the H series and competitor's belts in terms of durability.

GP8M

GP14M

The MEGA TORQUE U timing belt made with polyurethane surpasses the transmission capabilities of the SUPER TORQUE U timing belt. As a result, it enables the use of narrower belt and pulley widths, ultimately leading to a more compact and efficient design.

High transmission capacity

Enables approximately 1.7 times higher load transmission compared to our standard product.

MTS8M

Giga Torque GX

SUPER TORQUE Series

H Series Timing Belt

Long-span Timing Belt

FREESPAN™ Timing Belt

(815) 434-1282

Toll Free (877) 625-7832

mblusa.websupport@mitsuboshi.com

601 Dayton Road

Ottawa, Illinois 61350 USA

Rubber	H-NBR
Cord	Carbon
Tooth fiber	Nylon/Teflon

Temperature	-22°F to 230°F
Max. belt speed	30 m/s
Electric conductive	Yes

Rubber	H-NBR
Cord	Carbon
Tooth fiber	Nylon/aramid

Temperature	-22°F to 230°F
Max. belt speed	30 m/s
Electric conductive	Yes

Rubber	H-NBR
Cord	Carbon fiber
Tooth fiber	Nylon

MEGA TORQUE Series

MEGA TORQUE Series

MEGA TORQUE GIIP

MTS14M

Construction

Characteristics

MEGA TORQUE GII

MTS8M

Construction

Characteristics

MEGA TORQUE EX

MTS3M / MTS5M

Construction

Characteristics

MEGA TORQUE G

MTS5M / MTS8M / MTS14M

Construction

Characteristics

MEGA TORQUE EP

GP8M / GP14M

Construction

Characteristics

MEGA TORQUE U

MTS8M

Construction

Characteristics

Questions?

Design Manual

Get In Touch

Menu

	MTS5M	MTS8M/MTS14M
Rubber	Chloroprene	H-NBR
Cord	Glass fiber
Tooth fiber	Nylon

Temperature	-40°F to 248°F
Max. belt speed	30 m/s
Electric conductive	No

Temperature	-4°F to 176°F
Max. belt speed	30 m/s
Electric conductive	Yes

Material	Polyurethane
Cord	Aramid